Mountfield 2125H Bedienerhandbuch PDF herunterladen (Seite 13)

Engine Model:

RV150 and SV150

RV40, V35

Page

13 of 36 Mountfield150cc Selfhelp Guide 2011, Issue 1.0

D: Adjusting the micro switch:

1. Hold the OPC bar gently in to the main handle

and listen for a faint click coming from the

back right hand corner of the engine. You are

checking here for a micro-switch engaging

which allows the electrical feed to the spark

plug. If there is no audible click it may be that

the micro-switch is not fully engaged.

2. In this case, follow the OPC cable down to the

back right hand corner of the engine where

the lever moves when the OPC is depressed.

Come BACKWARDS along the bare metal

cable (2) some 8cms to where the metal

bracket (5) grips the black plastic cable

covering (directly below the fuel filler).

3. Release the plastic cable cover by

compressing the 2 lugs (X) inwards on the

plastic cable cover that are splayed out and

hold it in place. Feed the black plastic cable

cover BACKWARDS through the bracket (5).

4. With a pair of pliers bend the metal bracket

(5) BACKWARDS 4 mm towards the handle,

and then replace the cable in the bracket.

This will now engage the micro-switch by

pulling it further, and you should now be able

to start the mower in the normal way.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Keine Kommentare

Mountfield 2125H Bedienerhandbuch Seite 13